Specification:
For BS 4504 BS EN1092-2 PN10 / PN16/ PN25 flange mounting.
Face-to-Face dimension conforms to ISO 5752 / BS EN558.
Epoxy fusion coating.

A float control valve maintains a preset water level in a reservoir or a water tank. In its simplest form a float valve is fitted with a float designed to control the top water level in the tank. A dual level float can be fitted to control the level between top and bottom levels. Float control valves can be remotely operated with an addition of a solenoid or a hydraulic relay.
Typical Applications 
A top level float valve is typically used where water tanks are required to be full and where the tank is not filled up by a dedicated pump, a dual level float can be fitted in order to minimise pump starts and stops.


Manufactured to ISO 9001;
Available Valve sizes DN32~600;
Available MPA 1.5~2.5;
Available Up to -10ºC~ 80ºC;
Face-to-Face dimension conform to BS EN 558.
Flange drill is suitable for BS EN 1092-2 PN10/ PN16.
Test as ISO 5752.
Working pressure:
10 bar / 16 bar for PN10 / PN16.
Fast response time;
Fast shutdown on command;
Full unrestricted valve operation on tank filling;
Easily adjustable level settings
Low supply pressure options
Accurate Level Control
Completely Automatic Operation
Simple Operation
Maintenance Free
Mateiral list: