Trunnion Ball Valve - Ball Valves

products

Home Products Ball Valves
Trunnion Ball Valve
  • Trunnion Ball Valve
  • Trunnion Ball Valve
  • Trunnion Ball Valve
向上
向下

Trunnion Ball Valve

  • Product description:

    Cast trunnion ball valve /Forged trunnion ball valve/Direct mounted trunnion ball valve / Actuated trunn...

Similar items

read more

  • Details
  • Description
  • Download

Design Standard and Main part material:

Design:

API608, API6D,ASME B16.34

Face to face:

ASME16.10 , API6D,EN558-1

Flange end dimension:

ASME B16.5, ASME B16.47(API 605,MSS SP-44)

Butt-weld end dimension:

ASME B16.25(BW)

Test and inspection:

API598/ISO 5208

Working temperature:

-196+500

Nominal diameter:

1/2” 56”

Nominal pressure:

CLASS150CLASS2500,PN10PN420

End connection type:

FLANGE, WAFER,LUG,BUTT-WELDING,NPT/BSP THREAD

Nace

NACE0175

Actuator

LEVER,WORM GEAR,PNEUMATIC,ELECTRICAL, ELECTRO-HYDRAULIC, PNEUMATIC  OPERATOR WITH  MANUAL,

HYDRULIC OPRATOR WITH MANUAL,              EXPLOSION-PROOF ELECTRO OPERATOR

Body mateiral:

A216-WCB, A105;A352-LCB,A352-LCC,A350-LF2;A351-CF8,A351-CF8M;A182-F304,A182-F316

Ball material:

A105+ENP;A350-LF2+ENP;A182-F304,A182-F316

Bolt/Nut:

A193-B7,A194-2H;A320-L7,A194-4;A193-B8,A194-8

Stem:

A276-410,A276-420;A350-LF2,A276-304;A276-304,A276-316

Seat:

Standard: PTFE OR NYLON, Special:PEEK OR DEVLON

O-Ring

NBR OR VITON

Gasket:

Graphite+Stainless steel

Fixed/Trunnion ball Valve

A trunnion ball valve has an additional mechanical anchoring of the ball at the top and the bottom, which is suitable for larger and higher pressure valves, DBV Trunnion mounted Ball valves are With Soft or metal-seated Design putting a pre- mium on safety and usability.

 

The Ball of trunnion ball valve is fixed, it does not move with medium pressure. Trunnion ball valve has floating seat, the seats move with the medium pressure to tight the ball and seal ring to ensure sealing reliability. Bearings could be mounted in top or bottom stem, which efficiently reduces operation torque. Which is suitable for widely service in valves with high pressure and big sizes. To decrease the operation torque and increase sealing reliability, lubricated ball valves are adopted in recent years. A special sealant is injected between sealing faces of lubricated ball valve to create a layer. This increase the sealing reliability while decreasing the operation torque, which is better for high pressure, big sized ball valves.

 

 Sealant Injection Device: Trunnion mounted ball valves are provided with devices for Sealant injection, which are on both the stem and seat for the trunnion ball valves of DN>150mm (NPS6), and in the body cavity for the valve of DN<125mm. When the O-ring of stem or the body seat ring is damaged due to accident, the medium leakage between body and stem can be prevented by injecting the Sealant through this device.

 Double Block & Bleed: The double block and bleed condition is available in all seat design configurations. When the ball is in the closed position the body cavity pressure may be drained down to 'zero' by opening the bleed valve and draining the fluid by removing the drain plug. Each seat works independently assuring tight shut off seal against ball on the upstream and downstream side.

 Anti-static: Except for the anti-static features floating ball valve has, the trunnion ball valve has more. The ball of the trunnion ball valve gets close contact with each other through the trunnion, adjusting cushion, and down-end cap, the passage of static electricity thus forms together with the valve, which may lead the static electricity caused by sparks generated by friction between the ball and seat during on and off performance to the ground to prevent the possible risks of fire or explosion.

 Fire Safe: With the valve heated or occured in a fire application, the nonmetal material parts such as seat sealing ring of PTFE, O-ring for the stem, and sealing gasket for body and bonnet, might be damaged due to high temperature. Vatac's auxiliary metal to metal or the graphite specially designed seal is suitable for the trunnion ball valve to effectively prevent both internal and external leakage of the valve in case of fire, As required by customers, Vatac's fire safe design for the trunnion ball valve meets the requirement of API 607, API 6Fa and BS 6755.

 

All Trunnion ball valves manufactured and supplied by DBV are with the following main features:

 Manufactured under ISO 9001:2008 Management System, with CE PED & API 6D Certified

 Standards compliance to API 6D, BS 5351, ASME B16.34, DIN 3202 or equivalents

 Flanged Dimensions in accordance with ASME B16.5

 Long & Short Patterns to ASME B16.10 or API 6D

 Fire Safe, Anti-static and Stem Blow-out Proof

 Full Port or Regular Port options

 Double Block and Bleed

 NACE MR-01-75

 

DBV offers Trunnion Mounted ball valves including, but not limited to

 Cast trunnion ball valve  Forged trunnion ball valve

 Direct mounted trunnion ball valve  Actuated trunnion ball Valve

 Trunnion D.B.B ball valve - Double block and bleed ball Valve